Dyne-inks Set check treatment

Dyne-inks Set check treatment, surface tension. This is one of the defining criteria of adhesion of printing inks, varnishes, adhesives on different plastic and metal surfaces. But determine of it is also a quick method to verify the purity of metal surfaces. If this value is right, the result is a printable plastic surface or a paintable, galvanizable metal surface. So you need Dyne-inks Set check treatment. This value is in the current measurement system mN/m (milliNewton/meter), but often used of previously dyne/cm (the numerical value is same).

The general rule, with few exceptions, a higher surface tension gives a better adhesion. The low surface tension is partly due to the characteristics of the material. For example, many plastics show very low surface tension, so, requiring physical or chemical surface treatment to achieve a good adhesion. On the other hand, the surface contamination (grease, oil, fingerprints) can also be the cause of low surface energy. So, you necessary to check the value of surface tension before printing, painting or galvanizing.

Advantages

• Possibility of quick measurements with high accuracy, even on plastic or metal surfaces.
• Good readability.
• Long shelf life if cap is kept closed properly.

Do you have a question? Contact us! Let us help you. Click here >>